How To Disable Hyundai Palisade ISG – Autostop Eliminator

How to Disable Idle Stop & Go on Your Hyundai Palisade

The Hyundai Palisade comes equipped with the Idle Stop & Go (ISG) system, designed to reduce fuel consumption by automatically shutting down the engine when the vehicle is at a standstill, such as at a red light, stop sign, or in a traffic jam. Understanding how to control and disable this system can enhance your driving experience. Here's a comprehensive guide of how to disable idle stop & go on your Hyundai Palisade and why it’s important.


Idle Stop & Go System Overview

Before we jump into how to disable the ISG system, let’s make sure there’s a foundation of understanding. The ISG system operates by shutting down the engine when the vehicle speed decreases to 0 km/h, and the brake pedal is depressed with the shift lever in D (Drive) or N (Neutral). The auto stop indicator illuminates in green on the instrument cluster when the engine stops. However, certain conditions may prevent the ISG system from engaging, indicated by an orange ISG light on the dash. If the ISG light is blinking in yellow, it indicates a malfunction with the system. In this case, contact your Hyundai dealer for a thorough check.


Malfunction Causes include:

  • Driver’s seat belt not fastened.
  • Hood or driver’s door not closed properly.
  • Vehicle not reaching a minimum speed of 5 km/h.
  • A/C blower set at the highest speed.
  • Vehicle on a grade of over 12% uphill or 5% downhill.
  • Vehicle’s battery not sufficiently charged.

How to Restart the Engine

To restart the engine once the ISG system turns it off, simply lift your foot off the brake pedal. The engine automatically restarts when you release. Note that the ISG system defaults to the on position each time you start your vehicle. The location of the ISG OFF button may vary based on your model.


Reasons to Disable Auto Start-Stop

While initially marketed as a means to enhance fuel efficiency and economy in your Hyundai Palisade, auto start-stop technology often proves to be more of an inconvenience than a benefit. The need to regularly deactivate it during vehicle startup becomes a bothersome task, and the frequent cycles of activation and deactivation can place undue stress on your SUV's battery and starter. Furthermore, essential functions such as charging and air conditioning/heating may cease whenever the ISG is engaged. This is where Autostop Eliminator steps in to provide a solution. Our specialized products are meticulously crafted to permanently eliminate & override the ISG feature in your Hyundai Palisade SUV, streamlining your daily routine and elevating your driving experience. With our solution, you can say goodbye to the persistent frustrations of auto start-stop technology and embrace a more efficient and reliable journey on the road.


Deactivating the Hyundai Palisade ISG System

If you find the this feature annoying, then here is how to deactivate the ISG system on your Palisade:


How To Temporarily Disable the Palisade ISG System


  1. Locate the Auto Start Stop Button: Find the disable auto stop button near the passenger side of the dash – it has an A inside a circle with an arrow at the end. 
  2. Click the Button: Hold down the disable auto stop button for a few seconds to temporarily turn off the auto stop feature.
  3. Remember to Turn it Off: You'll need to press the disable auto stop button every time you start your Palisade, as the vehicle is programmed to turn the feature back on after each ignition cycle.

How To Permanently Disable The Palisade ISG System


  1. Buy an Autostop Eliminator

Opt For A Permanent Solution

While the ISG system was designed to improve fuel efficiency, some drivers find it inconvenient. If you want to eliminate having to manually turn this system off each time you get into your car, then you will need an Autostop Eliminator. Our Autostop Eliminator technology offers a solution by permanently disabling the auto start-stop feature in your Hyundai Palisade. Our technology eliminates the need for manual deactivation with each ignition cycle. Be sure to visit our website or send us a message online to ensure you get the appropriate Autostop Eliminator for your vehicle’s make and model!


Buy an Autostop Eliminator

Now that you know investing in an Autostop Eliminator is the way to go, what are you waiting for? Installation takes only 15-20 minutes. You only have to activate Autostop Eliminator once during ignition to permanently disable the ISG feature on your Hyundai Palisade. If you want to restore the feature, push the button again. With Autostop Eliminator, you can say goodbye to the hassle of ISG technology and enjoy a more efficient and reliable journey in your Hyundai Palisade. Visit our website to explore Autostop Eliminator products for various vehicles, including Hyundai Palisade, Hyundai, Ford, Chrysler, Chevy, Jeep, Dodge, Subaru, Kia, Lincoln, and GM models. If you have questions, feel free to contact us – we look forward to enhancing your driving experience!

Leave a comment

Please note, comments must be approved before they are published